| 编号 |
中文名称 |
英文名称 |
| ANSI E1.16-2002
|
娱乐技术.金属卤素灯镇流器动力电缆的结构标准
|
Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables
|
| ANSI E1.27-1-2006
|
娱乐业技术.用于ANSI E1.11 (DMX512-A)和USITT DMX512/1990产品的便携式控制电缆的标准
|
Entertainment Technology - Standard for Portable Control Cables for use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products
|
| ANSI J-STD-042-2002
|
电缆的应急警报信息
|
Emergency Alert Message for Cable
|
| ANSI T1.307-2003
|
电信.防火标准.设备组件的可燃性要求以及电线和电缆的火焰传播要求
|
Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable
|
| ANSI/AAMI EC53-1995
|
ECG电缆和导线
|
ECG Cables and Wires
|
| ANSI/AAMI EC53A-1998
|
ECGA电缆和导线
|
ECG Cables and Wires
|
| ANSI/API SPEC17E-2003
|
水下临时管道及电缆规范
|
Specification for Subsea Umbilicals
|
| ANSI/ASTM A523-1996
|
高压管型电缆线路用平端无缝与电阻焊钢管规范
|
Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
|
| ANSI/ASTM D1047-1995
|
电线及电缆用聚氯乙烯套管规范(10.01)
|
Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01)
|
| ANSI/ASTM D1351-2002
|
电线和电缆用热塑性聚乙烯绝缘规范
|
Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
|
| ANSI/ASTM D1523-2000
|
工作温度90℃的电线和电缆用合成橡胶绝缘规范(10.01)
|
Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operations (10.01)
|
| ANSI/ASTM D2219-2002
|
工作温度为60℃的聚氯乙烯电线和电缆绝缘规范(10.01)
|
Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation, Specification for (10.01)
|
| ANSI/ASTM D2220-2002
|
工作温度为75℃的聚氯乙烯电线和电缆绝缘规范(10.01)
|
Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation, Specification for (10.01)
|
| ANSI/ASTM D2308-2002
|
电线和电缆用热塑聚乙烯包装物规范
|
Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
|
| ANSI/ASTM D2633-2002
|
电线和电缆用热塑性绝缘体和护套测试方法
|
Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
|
| ANSI/ASTM D2655-2000
|
额定电压达到2000伏的电线和电缆交联聚乙烯绝缘材料规范(10.02)
|
Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ANSI/ASTM D2656-2000
|
额定电压2001V到35V的电线和电缆交联聚乙烯绝缘材料规范(10.02)
|
Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02)
|
| ANSI/ASTM D2768-1995
|
导线和电缆通用乙烯和丙烯橡胶套管规范(10.02)
|
Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable (10.02)
|
| ANSI/ASTM D2770-2001
|
电线及电缆用耐臭氧乙丙橡胶整体绝缘材料及套管规范
|
Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ANSI/ASTM D2802-2003
|
电线和电缆用耐臭氧乙丙橡胶绝缘材料规范
|
Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
|
| ANSI/ASTM D3485-2002
|
预装配导线和电缆用可盘绕光滑壁聚乙烯导管规范
|
Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ANSI/ASTM D3554-2001
|
电线和电缆用耐划痕热塑性高密度聚乙烯绝缘子规范
|
Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable
|
| ANSI/ASTM D3555-2001
|
电线和电缆用耐划痕交叉连接热塑性高密度聚乙烯绝缘子规范
|
Specification for Track-Resistant Black Crosslinked Thermosetting Polyethylene Insulation for Wire and Cable
|
| ANSI/ASTM D4244-1995
|
重负载和超重负载丙烯腈丁二烯聚氯乙烯(NBR PVC)电线和电缆护套通用规范
|
Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02)
|
| ANSI/ASTM D4245-2002
|
工作温度为90℃干/75℃湿的电线和电缆的耐臭氧热塑性合成橡胶绝缘规范
|
Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation
|
| ANSI/ASTM D4246-2002
|
工作温度为90℃的电线和电缆的耐臭氧热塑性合成橡胶绝缘规范
|
Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation
|
| ANSI/ASTM D4313-2003
|
电线及电缆用普通、重型及超重型交联氯化聚乙烯套管规范
|
Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable
|
| ANSI/ASTM D4314-1999
|
普通重负载和超重负载交叉链环的氯磺化聚乙烯电线和电缆护套规范(10.02)
|
Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02)
|
| ANSI/ASTM D4363-1998
|
电线和电缆的热塑氯化聚乙烯套管规范
|
Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable
|
| ANSI/ASTM D4565-1999
|
远程通信电线和电缆用绝缘体和套管物理和环境性能特性的试验方法(10.02)
|
Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
|
| ANSI/ASTM D4566-1998
|
远程通信电线和电缆用绝缘体和套管电气性能特性试验方法(10.02)
|
Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
|
| ANSI/ASTM D4568-1999
|
评价电缆填充物、溢流元件、聚烯烃线和电缆材料相容性的试验方法(10.02)
|
Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02)
|
| ANSI/ASTM D470-2005
|
电线和电缆用交联绝缘材料和护套的试验方法(10.01)
|
Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
|
| ANSI/ASTM D4730-2002
|
电信电线和电缆浸渍化合物规范
|
Specification for Flooding Compounds for Telecommunications Wire and Cable
|
| ANSI/ASTM D4731-2002
|
电信电线和电缆用热充填化合物规范
|
Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
|
| ANSI/ASTM D4732-2002
|
电信电线和电缆用冷充填化合物规范
|
Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
|
| ANSI/ASTM D4872-1999
|
电线和电缆填充化合物介电试验的试验方法
|
Test Method for Dielectric Testing of Wire and Cable Filling Compounds
|
| ANSI/ASTM D5424-2005
|
在立式电缆槽中燃烧电缆引起的烟雾遮避性的试验方法(10.02)
|
Test Method for Smoke Obscuration Caused by Burning Cables in a Vertical Configuration (10.02)
|
| ANSI/ASTM D5537-2003
|
电缆或光缆绝缘材料在立式电缆槽装置中燃烧时热发散、火焰传播和质量损失测试的试验方法
|
Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ANSI/ASTM D6070-2002
|
预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法
|
Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ANSI/ASTM D6096-2002
|
工作温度为90℃的电线和电缆聚氯乙烯绝缘体规范
|
Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation
|
| ANSI/ASTM D6113-2003
|
使用锥形量热计对电气或光纤电缆含的绝缘材料的着火试验反应特性进行测定的标准试验方法
|
Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
| ANSI/ASTM D866-1999
|
电线及电缆用丁苯合成橡胶套规范
|
Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01)
|
| ANSI/ASTM F1835-1997
|
电缆连接设备导则
|
Guide for Cable Splicing Installations
|
| ANSI/ASTM F1837M-1997
|
热缩电缆端口密封规范(米制)
|
Specification for Heat-Shrink Cable Entry Seals (Metric)
|
| ANSI/ASTM F1883-2003
|
用美国线规(AWG)或米制单位选择电线和电缆规格的实施规程
|
Practice for Selection of Wire and Cable Size, in AWG or Metric Units
|
| ANSI/CEA 2030-2005
|
多用室内音频电缆标准
|
Multi Room Audio Cabling Standard
|
| ANSI/CEA 600.33-1997
|
同轴电缆物理层和介质规范
|
Coax Cable Physical Layer and Medium Specification
|
| ANSI/EIA 364-101-2000
|
电连接器、插孔和电缆组件或内连接系统的衰减试验程序
|
Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems
|
| ANSI/EIA 364-102-1998
|
电连接器、插孔、电缆组件或互连装置的上升时间衰减试验程序
|
Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA 364-107-2000
|
电连接器,插孔,电缆组件或互连装置的目测图和跳动试验程序
|
Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA 364-108-2000
|
电连接器、电缆组件或内连系统在适当的时候和Frequency Domain 测量的阻抗、反射系数、回波损失和电压柱波
|
Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA 364-38B-1999
|
电连接器.电缆拔出试验
|
Electric Connectors - Cable Pull-Out Test
|
| ANSI/EIA 364-41A-1984
|
电连接器.圆形护套电缆弯曲试验程序
|
Electric Connectors - Circular Jacket Cable Flexing Test Procedure
|
| ANSI/EIA 364-41C-1999
|
电连接器的TP-41型电缆挠曲试验程序
|
TP-41 Cable Flexing Test Procedure for Electrical Connectors
|
| ANSI/EIA 364-43B-2000
|
电连接器的电缆夹紧(弯矩)试验程序
|
Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
|
| ANSI/EIA 403-A-1990
|
公共天线电视设备用75欧姆精密同轴电缆连接器
|
Precision Coaxial Connectors for CATV Application (75 Ohms)
|
| ANSI/EIA 429-1976
|
扁平电缆连接器的一般标准
|
Connectors, Electrical Flat Cable Type, General Specification for
|
| ANSI/EIA 600.33-1997
|
共轴电缆物理层和介质规范
|
Coax Cable Physical Layer and Medium Specification
|
| ANSI/EIA 700AOAE-2000
|
使用单连接器固定的1.27mm间距双排的具有不可移动的带式电缆接触的锥形连接件的详细规范
|
Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)
|
| ANSI/EIA 700AOAF-2000
|
用于非常高密度电缆连接的0.8mm间距的锥形屏蔽连接器的详细规范
|
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
|
| ANSI/EIA-364-101-2000
|
电连接器、插座、电缆附件或互连系统衰减试验程序
|
Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems
|
| ANSI/EIA-364-102-1998
|
电连接器、插座、电缆附件或互连系统上升时间降低试验程序
|
Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA-364-103-1998
|
电连接器、插座、电缆附件或互连系统传播延迟试验程序
|
Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA-364-107-2000
|
电连接器、插座、电缆组件或互连系统的眼孔图样和不稳定性试验程序
|
Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA-364-108-2000
|
电连接器、电缆附件或互连系统在时间和频率域中测量的阻抗、反射系数、回程损耗和VSWR试验程序
|
Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems
|
| ANSI/EIA-364-38B-1999
|
电连接器.电缆拔出试验
|
Cable Pull-Out Test Procedure for Electrical Connectors
|
| ANSI/EIA-364-41C-1999
|
电连接器TP-41电缆挠曲试验程序
|
TP-41 Cable Flexing Test Procedure for Electrical Connectors
|
| ANSI/EIA-364-43B-2000
|
电连接器.电缆夹紧(弯曲瞬间)试验程序
|
Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
|
| ANSI/EIA-700AOAE-2000
|
单个连接器连接用、间距为1.27mm、带状电缆、双排不可拆卸触点的梯形连接器的详细规范(SCA2)
|
Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)
|
| ANSI/EIA-700AOAF-2000
|
极高密度电缆互连用间距0.8mm梯形屏蔽连接器的详细规范
|
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
|
| ANSI/EIA/TIA -455-104A-1993
|
纤维光学电缆的循环弯曲试验
|
Fiber Optic Cable Cyclic Flexing Test
|
| ANSI/EIA/TIA 455-6B-1992
|
光缆互连装置的电缆固着力的测试规程
|
Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices
|
| ANSI/EIA/TIA-455-37-1993
|
纤维光学电缆高低温的弯曲试验
|
Fiber Optic Cable Bend Test, Low and High Temperature
|
| ANSI/ICEA P-54-440-2002
|
安装在电缆管道中的电缆的载流量
|
Ampacities of Cables Installed in Cable Trays
|
| ANSI/ICEA S-101-699-2001
|
一般用途非局域网电信布线系统用3类非屏蔽双绞线室内电缆的技术要求
|
Category 3 Individually Unshielded Twisted Pair Indoor Cable For Use In General Purpose Non-LAN Telecommunications Wiring Systems Technical Requirements
|
| ANSI/ICEA S-103-701-2004
|
上升电缆
|
Riser Cable
|
| ANSI/ICEA S-105-692-2004
|
600伏特单层热固性绝缘公用地下配电电缆
|
600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables
|
| ANSI/ICEA S-108-720-2004
|
额定电压46至345KV的挤压绝缘电力电缆的标准
|
Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV
|
| ANSI/ICEA S-532-1973
|
控制电缆、热电偶软线和仪器仪表用电缆
|
Control, Thermocouple Extension and Instrumentation Cables
|
| ANSI/ICEA S-70-547-2000
|
抗风化聚烯烃包覆电线和电缆
|
Weather-Resistant Polyolefin-Covered Wire and Cable
|
| ANSI/ICEA S-76-474-2005
|
中性线支撑的额定值600伏特的抗风化挤制绝缘电力电缆组件
|
Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts
|
| ANSI/ICEA S-80-576-2002
|
在远程通信布线系统技术要求中使用的1 & 2 类分别无屏蔽双绞室内电缆(有或无全屏蔽)
|
Category 1 & 2 Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in Communications Wiring Systems Technical Requirements
|
| ANSI/ICEA S-81-570-2005
|
加固设计的600伏特电缆标准
|
Standard for 600 Volt Cables of Ruggedized Design
|
| ANSI/ICEA S-84-608-2002
|
聚烯烃绝缘填充铜导线通信电缆的技术要求
|
Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements
|
| ANSI/ICEA S-85-625-2002
|
空芯聚烯烃绝缘铜导体通信电缆的技术要求
|
Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable - Technical Requirements
|
| ANSI/ICEA S-86-634-2004
|
通信电缆直埋配电和服务线.技术要求
|
Telecommunications Cable Buried Distribution and Service Wire - Technical Requirements
|
| ANSI/ICEA S-87-640-1999
|
室外光纤通信电缆
|
Optical Fiber Outside Plant Communications Cable
|
| ANSI/ICEA S-90-661-2002
|
通信配线系统中使用的独立无屏蔽室内绞线对电缆.技术要求
|
Individually Unshielded Twisted Pair Indoor Cables for Use In Communication Wiring Systems - Technical Requirements
|
| ANSI/ICEA S-94-649-2005
|
额定值5000-46000伏特的同轴中性电缆
|
Concentric Neutral Cables Rated 5,000-46,000 Volts
|
| ANSI/ICEA S-97-682-2000
|
额定电压5000-46,000伏有保护设施的电力电缆
|
Utility Shielded Power Cables Rated 5000 - 46,000 Volts
|
| ANSI/ICEA S-98-688-1997
|
聚烯烃绝缘铜导线宽频双扭线电缆空心
|
Broadband Twisted Pair Cable Aircore, Polyolefin Insulated, Copper Conductor
|
| ANSI/ICEA S-99-689-1997
|
聚烯烃绝缘填充铜导线宽频双扭线电缆
|
Broadband Twisted Pair Cable Filled, Polyolefin Insulated, Copper Conductor
|
| ANSI/ICEA T-26-465-2000
|
试验用压模绝缘体电缆、控制电缆、测量仪器电缆和轻便电缆频繁取样的指南
|
Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
|
| ANSI/IEEE 1017-2004
|
潜水电泵电缆的现场试验推荐规范
|
Recommended Practice for Field Testing Electric Submersible Pump Cable
|
| ANSI/IEEE 1018-2004
|
规定潜水电泵电缆用推荐规程.乙烯-丙烯橡胶绝缘
|
Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
|
| ANSI/IEEE 1019-2004
|
规定潜水电泵电缆用推荐规程.聚丙烯绝缘
|
Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
|
| ANSI/IEEE 1073.3.2-2000
|
医疗装置通信.传输轮廓.以IrDA为基的连接电缆
|
Medical Device Communications - Transport Profile - IrDA Based - Cable Connected
|
| ANSI/IEEE 1120-2004
|
海底电力和通信电缆的规划、设计和安装中所考虑因素的指南
|
Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable
|
| ANSI/IEEE 1143-1994
|
低压电缆屏蔽实施指南
|
Guide on Shielding Practice for Low Voltage Cables
|
| ANSI/IEEE 1185-1994
|
发电站电缆的安装方法指南
|
Guide for Installation Methods for Generating Station Cables
|
| ANSI/IEEE 1202-1991
|
工业和商业中走线架内用电缆的燃烧试验
|
Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies
|
| ANSI/IEEE 1210-2004
|
使用电线和电缆测定电缆润滑剂可混用性的标准试验
|
Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable
|
| ANSI/IEEE 1235-2000
|
地下电力电缆和管道用可识别护套的特性指南
|
Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
|
| ANSI/IEEE 1242-1999
|
石油和化学工厂的电源、控制和专用电缆的详细规定和选择指南
|
Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants
|
| ANSI/IEEE 1299/C62.22.1-1996
|
保护绝缘屏蔽电力电缆系统的电涌放电器的连接指南
|
Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
|
| ANSI/IEEE 1300-1997
|
气体绝缘主配电装置的电缆连接指南
|
Guide for Cable Connections for Gas Insulated Substations
|
| ANSI/IEEE 1425-2001
|
浸渍纸绝缘传输电缆系统的剩余使用寿命的评价指南
|
Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems
|
| ANSI/IEEE 1511-2004
|
额定电压为5kV至46 kV的系统上电力电缆、接头和终端故障的调查和分析指南
|
Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV
|
| ANSI/IEEE 383-2003
|
核电站1E级电缆质量鉴定和现场拼接标准
|
Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
|
| ANSI/IEEE 400-2002
|
电力电缆系统现场进行直流高压试验的指南
|
Direct Voltage Tests on Power Cables in the Field, Guide for Making
|
| ANSI/IEEE 400.2-2004
|
使用超低频(VLF)的屏蔽电力电缆系统的现场试验指南
|
Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
|
| ANSI/IEEE 404-2000
|
额定电压为5000-138000V的挤压介质电缆接头和额定电压2500V-500000V的层压介质电缆接头
|
Cable Joints for Use with Extruded Dielectric Cable Rated 5 000 - 138 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2 500-500 000 V
|
| ANSI/IEEE 48-1996
|
高压交流电缆终端的标准试验程序和要求
|
Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
|
| ANSI/IEEE 515-2004
|
工业用电阻热示踪的电缆热试验、设计、安装和维护的推荐实施规程
|
Cables, Heating-Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications, Recommended Practice for
|
| ANSI/IEEE 525-1993
|
变电站电缆系统的设计和安装
|
Design and Installation of Cable Systems in Substations
|
| ANSI/IEEE 576-2000
|
工业和商业用绝缘电力电缆的安装、端接和检测的推荐实施规程
|
Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications
|
| ANSI/IEEE 628-2001
|
核电站1E级电路电缆管道系统的设计、安装和合格鉴定的标准
|
Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of
|
| ANSI/IEEE 634-2004
|
电缆防火鉴定试验标准
|
Standard for Cable Penetration Fire Stop Qualification Test
|
| ANSI/IEEE 635-2003
|
电力电缆铝护套的选择和设计指南
|
Guide for Selection and Design of Aluminum Sheaths for Power Cables
|
| ANSI/IEEE 690-2004
|
核电站1E级电路用电缆系统的设计和安装
|
Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
|
| ANSI/IEEE 835-1994
|
电力电缆的载流量表
|
Power Cable Ampacity Tables
|
| ANSI/IEEE 848-1996
|
防火电缆载流量额定降低测量定的标准程序
|
Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables
|
| ANSI/IEEE C37.20.1a-2005
|
金属壳密封的低压电力线路断路器开关设备标准.修改1:短时间和短路可耐电流测试;多电缆连接的最小区域
|
Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections
|
| ANSI/IPC WHMA-A-620-2002
|
电缆和导线护皮组件的要求和验收
|
Requirements and Acceptance for Cable and Wire Harness Asssemblies
|
| ANSI/NECA 104-2006
|
安装铝建筑电线和电缆的推荐规程
|
Recommended Practice for Installing Aluminum Building Wire and Cable
|
| ANSI/NECA 120-2005
|
安装铠装电缆(AC型)和金属包覆电缆(MC型)标准
|
Standard for Installing Armored Cable (Type AC) and Metal Clad Cable (Type MC)
|
| ANSI/NECA 600-2003
|
中压电缆安装推荐实施规程
|
Recommended Practice for Installing Medium Voltage Cable
|
| ANSI/NEMA FB-1-2003
|
导线管和电缆组件的连接件、铸造金属箱和导线管体
|
Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies
|
| ANSI/NEMA VE1-2003
|
金属电缆托架系统
|
Metal Cable Tray Systems
|
| ANSI/NEMA VE2-2000
|
金属电缆板安装导则
|
Metal Cable Tray Installation Guidelines
|
| ANSI/NEMA WC27500-2000
|
航空航天和工业用电缆
|
Aerospace and Industrial Electric Cable
|
| ANSI/NEMA WC53-2000
|
试验用挤压介电功率、控制、仪器仪表和轻便电缆的标准试验方法
|
Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
|
| ANSI/NEMA WC57-2004
|
控制电缆、热电偶钻延长电缆和仪器电缆
|
Control, Thermocouple Extension and Instrumentation Cables
|
| ANSI/NEMA WC63.2-1996
|
建筑物内数据同轴通信电缆的性能标准
|
Performance Standard for Coaxial Premise Data Communications Cables
|
| ANSI/NEMA WC66-2001
|
6类和7类100欧姆屏蔽和非屏蔽双股电缆性能标准
|
Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables
|
| ANSI/NEMA WC70-1999
|
额定配电电压 2000V或更低的无屏蔽电力电缆
|
Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
|
| ANSI/NEMA WC71-1999
|
额定电压为2001-5000V 的无屏蔽配电电缆
|
Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy
|
| ANSI/NEMA WC74-2000
|
5-46KV电能输送屏蔽电源电缆
|
5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy
|
| ANSI/NFPA 262-2002
|
电线和电缆的着火和烟雾特征试验
|
Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
|
| ANSI/SAE J1067-1998
|
七芯导线电缆
|
Seven-Conductor Cable
|
| ANSI/SAE J1494-1997
|
蓄电池升压器电缆
|
Battery Booster Cables
|
| ANSI/SAE J2394-1998
|
ABS动力用7导体电缆
|
Seven-Conductor Cable for ABS Power
|
| ANSI/SAE J560-1998
|
卡车挂车跨接电缆用7芯电缆连接器
|
Seven Conductor Electrical Connector for Truck-Trailer Jumper Cables
|
| ANSI/SCTE 03-2003
|
同轴电缆结构回波损耗试验方法
|
Test Method for Coaxial Cable Structural Return Loss
|
| ANSI/SCTE 10-2001
|
柔性同轴电缆冲击试验方法
|
Test Method for Flexible Coaxial Cable Impact Test
|
| ANSI/SCTE 100-2004
|
75 Ohm平滑铝制用户接入电缆规范
|
Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable
|
| ANSI/SCTE 102-2005
|
中继和配电连接器的电缆保持力测试
|
Cable Retention Force Testing of Trunk & Distribution Connectors
|
| ANSI/SCTE 103-2004
|
F连接器和F81筒的分接电缆的直流接触电阻的试验方法
|
Test Method for DC Contact Resistance, Drop cable to F-Connectors and F81 Barrels
|
| ANSI/SCTE 105-2005
|
数字电缆的单向接收设备标准
|
Uni-Directional Receiving Device Standard for Digital Cable
|
| ANSI/SCTE 107-2005
|
嵌入式电缆调制解调器装置规范
|
Embedded Cable Modem Device Specification
|
| ANSI/SCTE 11-2001
|
架空电缆防腐蚀变形的试验方法
|
Test Method for Aerial Cable Corrosion Protection Flow
|
| ANSI/SCTE 12-2001
|
干线、馈电和配电同轴电缆中间导线与绝缘材料的粘接
|
Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables
|
| ANSI/SCTE 13-2001
|
干线、馈电和配电同轴电缆用绝缘材料漏汽试验方法
|
Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable
|
| ANSI/SCTE 15-2002
|
中继、馈电和配电同轴电缆的规范
|
Specification for Trunk, Feeder, and Distribution Coaxial Cable
|
| ANSI/SCTE 21-2002
|
国家电视系统委员会(NTSC)在电缆数字传输数据流中的垂直闪烁间隔(VBI)数据的输送
|
Carriage of National Television System Committee (NTSC) Vertical Blinking Interval (VBI) Data in Cable Digital Transport Streams
|
| ANSI/SCTE 24-18-2004
|
IP电缆通信CMS到CMS信令
|
IPCablecom CMS to CMS Signaling
|
| ANSI/SCTE 24-20-2005
|
IPC电缆通讯网络的优先通信要求
|
Requirements for Preferential Telecommunications over IPCablecom Networks
|
| ANSI/SCTE 25-1-2002
|
混合光导纤维/同轴电缆厂外状态监测.物理层
|
Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer
|
| ANSI/SCTE 25-2-2002
|
混合光导纤维/同轴电缆厂外状态监测.中速存取控制(MAC)层
|
Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer
|
| ANSI/SCTE 25-3-2005
|
混合光纤/同轴电缆室外状态监视.第3部分:PS到T的应答器SCTE子代码
|
Hybrid Fiber/Coax Outside Plant Status Monitoring Part 3: - PS to T Interface SCTE Subcommittee Code: HMS 022
|
| ANSI/SCTE 25-4-2002
|
混合光纤/同轴电缆室外状态监视.第4部分:发射机应答器接口验收试验用HMS电源
|
Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test
|
| ANSI/SCTE 27-2003
|
对广播电缆附加说明的方法
|
Subtitling Methods for Broadcast Cable
|
| ANSI/SCTE 33-2002
|
引入电缆的尺寸
|
Diameter of Drop Cable
|
| ANSI/SCTE 35-2004
|
电缆传输的数字程序插入式字幕
|
Digital Program Insertion Cueing Message for Cable
|
| ANSI/SCTE 37-2003
|
混合光纤/同轴电缆外部设备状态监视SCTE-HMS-ROOT管理信息库(MIB)定义
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOT Management Information Base (MIB) Definition
|
| ANSI/SCTE 38-2-2005
|
混合光纤/同轴电缆厂外状态监视SCTE-HMS-DOWNLOAD-MIB管理信息库(MIB)定义
|
Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB)
|
| ANSI/SCTE 38-3-2002
|
混合光纤/同轴电缆厂外状态监视SCTE-HMS-COMMON-MIB管理信息库(MIB)
|
Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB)
|
| ANSI/SCTE 38-4-2002
|
混合光纤/同轴电缆厂外状态监视SCTE-HMS-PS-MIB管理信息库(MIB)
|
Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB)
|
| ANSI/SCTE 38-5-2002
|
混合光纤/同轴电缆厂外状态监视SCTE-HMES-FIBERNOTE-MIB管理信息基地
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base
|
| ANSI/SCTE 38-7-2002
|
混合光纤/同轴电缆厂外状态监视SCTE-HMS转发器接口总线(TIB)-MIB管理信息库(MIB) 定义
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder Interface Bus (TIB)-MIB Management Information Base (MIB) Definition
|
| ANSI/SCTE 38-8-2002
|
混合光纤/同轴电缆厂外状态监视SCTE-HMS-DOWNLOAD-MIB管理信息库(MIB)定义
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition
|
| ANSI/SCTE 39-2002
|
共轴总线、馈电线和配线电缆用静态最小弯曲半径的试验方法
|
Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables
|
| ANSI/SCTE 40-2004
|
数字电缆网络接口规范
|
Digital Cable Network Interface Specification
|
| ANSI/SCTE 48-2-2003
|
用H-P磁性相临场探测法测量有源和无源同轴电缆设备相关屏蔽性能的试验规程
|
Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using H-P Magnetic Close Field Probe
|
| ANSI/SCTE 48-3-2004
|
用GTEM电池测量编织同轴引入电缆的屏蔽效果的试验规程
|
Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell
|
| ANSI/SCTE 50-2002
|
同轴电缆阻抗规则性测量的试验程序
|
Test Procedure for Measuring Regularity of Impendance of Coaxial Cable
|
| ANSI/SCTE 51-2002
|
测定分接电缆编织层覆盖率的试验方法
|
Test Method for Determining Drop Cable Braid Coverage
|
| ANSI/SCTE 57-2003
|
电缆和MMDS用数字电视的卫星分布系统信息
|
System Information for Satellite Distribution of Digital Television for Cable and MMDS
|
| ANSI/SCTE 66-2003
|
同轴电缆阻抗的试验方法
|
Test Method for Coaxial Cable Impedance
|
| ANSI/SCTE 71-2003
|
75ohm编织、同轴、多用途电缆规范
|
Specification for Braided, 75 ohm, Coaxial, Multi-Purpose Cable
|
| ANSI/SCTE 72-2002
|
分接电缆/连接器接口的轴向负荷温度循环试验方法
|
Test Method for Axial Load Temperature Cycling of Drop Cable/Connector Interface
|
| ANSI/SCTE 73-2002
|
连接器对分接电缆接口的插入力的测试方法
|
Test Method for Insertion Force of Connector to Drop Cable Interface
|
| ANSI/SCTE 74-2003
|
75 Ohm射频同轴分接编织软电缆规范
|
Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable
|
| ANSI/SCTE 87-1-2003
|
电缆电信用图形符号.第1部分:HFC符号
|
Graphic Symbols for Cable Telecommunications - Part 1: HFC Symbols
|
| ANSI/SCTE 89-1-2004
|
IPCable2J家用标准.第1部分:家用电缆网络1.0
|
IPCable2Home Standard Part 1: Cable Home Networking 1.0
|
| ANSI/SCTE 89-2-2005
|
IPCable2家用标准.第2部分.家用电缆网络1.1
|
IPCable2Home Standard Part 2 - Cable Home Networking 1.1
|
| ANSI/SCTE 96-2003
|
电缆通信检验指南
|
Cable Telecommunications Testing Guidelines
|
| ANSI/SCTE 97-2004
|
电缆网络中视频需求用元数据要求
|
Metadata Requirements for Video-On-Demand in Cable Networks
|
| ANSI/SCTE 99-2004
|
轴拉连接器/用户引入电缆的试验方法
|
Test Method For Axial Pull Connector/Drop Cable
|
| ANSI/SCTE TP007-1998
|
同轴电缆结构回波损耗试验方法
|
Test Method for Coaxial Cable Structural Return Loss
|
| ANSI/SMPTE 276M-1995
|
电视.通过共轴电缆的AES/EBU 数字音频信号传输
|
Television - Transmission of AES/EBU Digital Audio Signals Over Coaxial Cable
|
| ANSI/TIA-455-162A-1999
|
光纤电缆的温度和湿度循环试验
|
Fiber Optic Cable Temperature-Humidity Cycling
|
| ANSI/TIA-455-171-A-2001
|
交替测量法进行短长度的多模渐变折射率光纤电缆和单模光纤电缆组件衰减量的测量
|
Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies
|
| ANSI/TIA-455-1B-1998
|
光纤互连设备用软电缆
|
Cable Flexing for Fiber Optic Interconnecting Devices
|
| ANSI/TIA-455-41A-1993
|
光纤电缆的抗压力负荷性能
|
Compressive Loading Resistance of Fiber Optic Cable
|
| ANSI/TIA-455-80-C-2003
|
用传输功率测量未用电缆固定的单模光纤的截止波长
|
Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
|
| ANSI/TIA-455-81-B-2000
|
填充式光纤电缆的复合流体(滴)试验
|
Compound Flow (Drip) Test for Filled Fiber Optic Cable
|
| ANSI/TIA-455-84B-1992
|
光纤电缆的护套自粘合(封合)
|
Jacket Self-Adhesion (Blocking) for Fiber Optic Cable
|
| ANSI/TIA-455-87B-1993
|
光纤电缆的打结试验
|
Knot Test for Fiber Optic Cable
|
| ANSI/TIA-455-89B-1998
|
光纤电缆护套的延伸率和抗拉强度
|
Jacket Elongation and Tensile Strength for Fiber Optic Cable
|
| ANSI/TIA-568 -B.2-9-200x-2005
|
商用建筑电信电缆敷设标准.第2部分:平衡双绞线电缆组件.补充件9.附加分类6平衡要求和测量过程
|
Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
|
| ANSI/TIA-568-B-3-1-2002
|
光纤电缆敷设元件标准.补充件1.50/125um光纤电缆的附加传输性能规范
|
Optical Fiber Cabling Components Standard - Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables
|
| ANSI/TIA-568-B-3-2000
|
4对100欧姆第5类敷设电缆的传输性能规范
|
Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling
|
| ANSI/TIA-568-B.1-1-2001
|
商用建筑电信电缆敷设标准.第1部分:一般要求.补充件1.4对UTP和4对ScTP插塞式电缆的最小弯曲半径
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
|
| ANSI/TIA-568-B.1-2-2003
|
商用建筑电信电缆敷设标准.第1部分:一般要求.补充件2.屏蔽电缆水平敷设的接地和连接规范
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
|
| ANSI/TIA-568-B.1-2001
|
商用建筑电信电缆敷设标准
|
Commercial Building Telecommunications Cabling Standard
|
| ANSI/TIA-568-B.1-3-2003
|
商用建筑电信电缆敷设标准.第1部分:一般要求.补充件3.根据纤维类型决定的光纤设备的可支持距离和信道衰减
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
|
| ANSI/TIA-568-B.1-4-2003
|
商用建筑电信电缆敷设标准.第1部分:一般要求.补充件4. 第6类850nm激光优选的50/125微米多模纤维的鉴别
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
|
| ANSI/TIA-568-B.1-5-2004
|
商业建筑物电信电缆连接标准.第1部分:一般要求.附录5:电信附件用电信电缆连接
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures
|
| ANSI/TIA-568-B.2-1-2002
|
商用建筑电信电缆敷设标准.第2部分:对称双绞合线部件.补充件1.4对100欧姆的第6类敷设电缆的传输性能规范
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
|
| ANSI/TIA-568-B.2-11-2005
|
商用建筑电信电缆敷设标准.第2部分:平衡双绞线电缆组件.补充件11.增加4对UTP和ScTP电缆直径的规范
|
Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables
|
| ANSI/TIA-568-B.2-2-2001
|
商用建筑电信电缆敷设标准.第2部分:对称双绞合线电缆敷设
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA-568-B.2-2001
|
商用建筑电信电缆敷设标准.第2部分:平衡绞合的成对电缆敷设
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA-568-B.2-3-2002
|
商用建筑电信电缆敷设标准.第2部分:对称双绞合线电缆敷设.补充件3.插入损耗和回波损耗通过/失效确定的附加
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
|
| ANSI/TIA-568-B.2-4-2002
|
商用建筑电信电缆敷设标准.第2部分:对称双绞合线电缆敷设.补充件4.铜制连接硬件的无钎焊连接的可靠性要求
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
|
| ANSI/TIA-568-B.2-5-2003
|
商用建筑电信电缆敷设标准.第2部分:对称双绞线电缆敷设元件.附录5
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5
|
| ANSI/TIA-568-B.2-6-2003
|
商用建筑物电信电缆敷设标准.第2部分:对称双绞电路敷设元件.补充件6:6类相关元件试验方法
|
Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures
|
| ANSI/TIA-758-1-1999
|
用户持有的外部设备远程通信电缆敷设
|
Customer-Owned Outside Plant Telecommunications Cabling
|
| ANSI/TIA-758-A-2004
|
客户拥用的外部设备电信电缆连接
|
Customer-Owned Outside Plant Telecommunications Cabling
|
| ANSI/TIA-854-2001
|
使用第6类对称双绞合线电缆实现1000Mb/s(1000BASE-TX)的全双工"以太网"物理层规范
|
A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling
|
| ANSI/TIA-862-2002
|
商用建筑物的建筑自动化系统的电缆敷设标准
|
Building Automation Systems Cabling Standard for Commercial Buildings
|
| ANSI/TIA/EIA 455-11C-2002
|
光纤元件和电缆的振动试验规程
|
Vibration Test Procedure for Fiber Optic Components and Cables
|
| ANSI/TIA/EIA 455-1B-1998
|
光纤互连装置的电缆挠曲试验
|
Cable Flexing for Fiber Optic Interconnecting Devices
|
| ANSI/TIA/EIA 455-200-2001
|
连接偏振嵌入损失.维护光纤和极化光纤软电线装置和电缆组件
|
Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
|
| ANSI/TIA/EIA 455-201-2001
|
极化固定纤维或极化纤维软导线装置和电缆组件的回程损耗
|
Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
|
| ANSI/TIA/EIA 455-61A-2000
|
用OTDR测量光纤或电缆衰减
|
Measurement of Fiber or Cable Attenuation Using an OTDR
|
| ANSI/TIA/EIA 455-80-C-2003
|
用传输功率测量未敷设的单模光纤电缆的截止波长
|
Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
|
| ANSI/TIA/EIA 455-95A-2000
|
光纤和电缆绝对光功率试验
|
Absolute Optical Power Test for Optical Fibers and Cables
|
| ANSI/TIA/EIA 472D000-A-1993
|
室外设备用光纤通信电缆的分规范
|
Sectional Specification for Fiber Optic Communications Cable for Outside Plant Use
|
| ANSI/TIA/EIA 568-B-3-2000
|
4对100欧姆5类电缆敷设传输性能规范
|
Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling
|
| ANSI/TIA/EIA 568-B.1-1-2001
|
商用建筑电信电缆标准.第1部分:一般要求.补充件 1.最小四对UTP和四对ScTP接插电缆弯曲半径
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
|
| ANSI/TIA/EIA 568-B.1-2-2003
|
商用建筑电信电缆敷设标准.第1部分:一般要求.附录2.铠装水平电缆敷设的接地和连接规范
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
|
| ANSI/TIA/EIA 568-B.1-2001
|
商用建筑物电信电缆敷设标准
|
Commercial Building Telecommunications Cabling Standard
|
| ANSI/TIA/EIA 568-B.1-3-2003
|
商用建筑电信电缆敷设标准.第1部分:一般要求.附录3.根据纤维类型决定的光纤设备的可支持距离和信道衰减
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
|
| ANSI/TIA/EIA 568-B.1-4-2003
|
商用建筑电信电缆敷设标准.第1部分:一般要求.附录4.类别6、850nm激光优选50/125微米多模纤维
|
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
|
| ANSI/TIA/EIA 568-B.2-1-2002
|
商用建筑电信电缆敷设标准.第2部分:对称绞线对元件.补充1.四线对100 OHM 6类电缆敷设传输性能规范
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
|
| ANSI/TIA/EIA 568-B.2-2-2001
|
商用建筑物电信电缆敷设标准.第2部分:双绞线对称电缆敷设
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA/EIA 568-B.2-2001
|
商用建筑物电信电缆敷设标准.第2部分:对称绞线对电缆敷设
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA/EIA 568-B.2-3-2002
|
商用建筑电信电缆敷设标准.第2部分:平衡绞线对电缆.补充件3:插入损耗和回波损耗通过/失败测定的附加考虑
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
|
| ANSI/TIA/EIA 568-B.2-4-2002
|
商用建筑电信电缆敷设标准.第2部分:对称绞线对电缆敷设元件.补充4.铜制连接零件的非钎焊连接可靠性要求
|
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
|
| ANSI/TIA/EIA 570-A-2-2002
|
住宅用电信电缆敷设标准.补充件2:住宅用管理电缆敷设
|
Residential Telecommunications Cabling Standard - Addendum 2 - Control Cabling for Residences
|
| ANSI/TIA/EIA 570-A-3-2002
|
住宅电信电缆布线标准.补充件3:居民区家庭音频布线
|
Residential Telecommunications Cabling Standard - Addendum 3 - Whole-Home Audio Cabling for Residences
|
| ANSI/TIA/EIA 758-1-1999
|
属于消费者的户外电信电缆
|
Customer-Owned Outside Plant Telecommunications Cabling
|
| ANSI/TIA/EIA 758-1999
|
属于消费者的户外电信电缆
|
Customer-Owned Outside Plant Telecommunications Cabling
|
| ANSI/TIA/EIA 854-2001
|
在6类平衡绞线对电缆上用1000Mb/s (1000BASE-TX)速度操作的全双向以太网地物理层规范
|
A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling
|
| ANSI/TIA/EIA 862-2002
|
商用建筑物用建筑物自动化系统电缆敷设标准
|
Building Automation Systems Cabling Standard for Commercial Buildings
|
| ANSI/UL 1072-2006
|
中等电压电力电缆安全性标准(推荐日期2006-2-24)
|
Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006)
|
| ANSI/UL 1277-2005
|
任选光纤构件的电力电缆和控制盘电缆的安全标准(第4版)
|
Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition)
|
| ANSI/UL 13-2005
|
有功率限制的电路电缆的安全标准
|
Standard for Safety for Power-Limited Circuit Cables
|
| ANSI/UL 1424-2005
|
有限功率火灾报警线路用电缆的安全标准
|
Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits
|
| ANSI/UL 1426-2001
|
小艇用电缆
|
Cables for Boats
|
| ANSI/UL 1569-2005
|
金属包覆电缆的安全标准
|
Standard for Safety for Metal-Clad Cables
|
| ANSI/UL 1655-2004
|
社区天线电视电缆用安全标准
|
Standard for Safety for Community-Antenna Television Cables
|
| ANSI/UL 1666-2002
|
直立安装于轴上的电缆和光缆的火焰扩散高度试验
|
Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
|
| ANSI/UL 1682-1998
|
针状与套状插头、插座和电缆连接器安全性标准
|
Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type
|
| ANSI/UL 209-2005
|
网状金属地面电缆管和配件的安全标准
|
Standard for Safety for Cellular Metal Floor Raceways and Fittings
|
| ANSI/UL 2196-2004
|
防火电缆的试验标准
|
Standard for Tests for Fire Resistive Cables
|
| ANSI/UL 2225-2005
|
分类危险场所用的电缆和电缆装配安全标准
|
Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations
|
| ANSI/UL 2239-2004
|
导线管、管道和电缆支持用五金件标准
|
Standard for Hardware for the Support of Conduit, Tubing and Cable
|
| ANSI/UL 2556-2005
|
电线和电缆的标准试验方法
|
Standard Test Methods for Wires and Cables (Bulletin)
|
| ANSI/UL 4-2003
|
铠装电缆
|
Armored Cable
|
| ANSI/UL 44-2005
|
橡胶绝缘电线和电缆
|
Rubber-Insulated Wires and Cables
|
| ANSI/UL 444-2005
|
通信电缆安全标准
|
Standard for Safety for Communications Cables
|
| ANSI/UL 493-1997
|
热塑性塑料绝缘的地下电源线和支路电缆
|
Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables
|
| ANSI/UL 5-2003
|
地面金属电缆槽和附件
|
Surface Metal Raceways and Fittings
|
| ANSI/UL 568-2004
|
非金属电缆盘系统的安全标准
|
Standard for Safety for Nonmetallic Cable Tray Systems
|
| ANSI/UL 5A-2003
|
非金属表面电缆管道和配件的安全标准
|
Standard for Safety for Non-Metallic Surface Raceways and Fittings
|
| ANSI/UL 5B-2004
|
支柱型槽形电缆管道和配件
|
Strut-Type Channel Raceways and Fittings
|
| ANSI/UL 5C-2003
|
与数据、信号和控制电路一起使用的表面电缆管道和配件的安全标准
|
Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits
|
| ANSI/UL 83-2003
|
热塑性绝缘电线和电缆
|
Thermoplastic-Insulated Wires and Cables
|
| ANSI/UL 854-2002
|
引入电缆.维修
|
Service-Entrance Cables
|
| ANSI/UL 884-2005
|
地板下电缆管和配件的安全标准
|
Standard for Safety for Underfloor Raceways and Fittings
|
| ASTM A 523-1996
|
高压管型电缆线路用平端无缝与电阻焊钢管的标准规范
|
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
|
| ASTM B 694-2003
|
电缆护套用铜、铜合金、包铜青铜和包铜不锈钢薄板和带材标准规范
|
Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
|
| ASTM B 736-2000
|
铝、铝合金和铝包层钢电缆屏蔽材料标准规范
|
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
|
| ASTM B 784-2000
|
绝缘电缆用改进的同芯绞捻铜导线标准规范
|
Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
|
| ASTM D 1047-1995
|
电线及电缆用聚氯乙烯套管的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
|
| ASTM D 1248-2005
|
电线和电缆用聚乙烯塑料挤制材料标准规范
|
Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
|
| ASTM D 1351-2002
|
电线和电缆用热塑性聚乙烯绝缘材料的标准规范
|
Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
|
| ASTM D 1523-2000
|
工作温度为90℃的电线和电缆用合成橡胶绝缘材料的标准规范
|
Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
|
| ASTM D 2219-2002
|
电线和电缆用聚氯乙烯绝缘材料(工作温度60℃)的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
|
| ASTM D 2220-2002
|
工作温度75℃时电线和电缆的聚氯乙烯绝缘性的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
|
| ASTM D 2308-2002
|
电线和电缆用热塑性聚乙烯套的标准规范
|
Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
|
| ASTM D 2633-2002
|
电线及电缆用热塑绝缘材料和护套的标准试验方法
|
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
|
| ASTM D 2655-2000
|
额定电压为0到2000V的电线和电缆用交联聚乙烯绝缘材料的标准规范
|
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ASTM D 2656-2000
|
疃ǖ缪刮001到35000V的电线和电缆用交联聚乙烯绝缘材料的标准规范
|
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
|
| ASTM D 2768-1995
|
电线和电缆用普通的乙丙橡胶护套标准规范
|
Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
|
| ASTM D 2770-2001
|
电线及电缆用耐臭氧的乙丙橡胶整体绝缘材料及套管材料标准规范
|
Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ASTM D 2802-2003
|
电线及电缆用耐臭氧乙烯烃聚合物绝缘材料的标准规范
|
Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
|
| ASTM D 3485-2002
|
预组合电线及电缆用平滑壁螺旋式聚乙烯导管的标准规范
|
Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ASTM D 3554-2001
|
75℃工作条件下电线及电缆用不留痕迹的黑色热塑高密度聚乙烯绝缘材料标准规范
|
Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
|
| ASTM D 3555-2001
|
90℃工作条件下电线及电缆用不留痕迹的黑色交联聚乙烯绝缘材料标准规范
|
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation
|
| ASTM D 4244-1995
|
电线及电缆用普通的、重型及超重型丙烯腈-丁二烯/聚氯乙烯套管的标准规范
|
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
|
| ASTM D 4245-2002
|
在干90℃/湿75℃时电线和电缆的耐臭氧热塑性弹性体绝缘的标准规范
|
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
|
| ASTM D 4246-2002
|
在90℃时电线和电缆的耐臭氧热塑性弹性体绝缘的标准规范
|
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
|
| ASTM D 4313-2003
|
电线及电缆用普通、重型及超重型交联氯化聚乙烯(CM)套管标准规范
|
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
|
| ASTM D 4314-2005
|
电线及电缆用普通、重型及超重型交联氯磺化聚乙烯(CSM)套管的标准规范
|
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
|
| ASTM D 4363-1998
|
电线和电缆用热塑氯化聚乙烯套管规格标准规范
|
Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
|
| ASTM D 4565-1999
|
远程通信电线和电缆用绝缘体和套管的物理和环境性能特性的标准试验方法
|
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
| ASTM D 4566-2005
|
远程通信电线和电缆用绝缘体和套管的电气性能特性的标准试验方法
|
Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
| ASTM D 4568-1999
|
评价电缆填充物、溢流元件、聚烯烃线和电缆材料间相容性的标准试验方法
|
Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
|
| ASTM D 470-2005
|
电线和电缆用交联绝缘材料与套管的标准试验方法
|
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
|
| ASTM D 4730-2002
|
电信电线和电缆用浸渍化合物的标准规范
|
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
|
| ASTM D 4731-2002
|
电信电线和电缆用热充填化合物的标准规范
|
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
|
| ASTM D 4732-2002
|
电信电线和电缆用冷充填化合物的标准规范
|
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
|
| ASTM D 4872-1999
|
电线和电缆填充物介电性测试的标准试验方法
|
Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
|
| ASTM D 532-1990
|
电线及电缆用天然橡胶套管规格
|
Natural Rubber Jacket for Wire and Cable
|
| ASTM D 5424-2005
|
电缆或光缆中绝缘材料在立式电缆槽结构中燃烧时的烟雾遮蔽性标准试验方法
|
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ASTM D 5537-2003
|
电缆或光缆绝缘材料在立式电缆槽装置中燃烧时热发散、火焰传播、烟的昏暗度和质量损失测试的标准试验方法
|
Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ASTM D 5875-1995
|
地下水质量监测设备安装和地质环境勘探的取样方法和电缆工具钻探的使用标准指南
|
Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
|
| ASTM D 6070-2002
|
预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性的标准试验方法
|
Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ASTM D 6096-2002
|
90鳦 操作的电线和电缆用聚氯乙烯绝缘的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
|
| ASTM D 6113-2003
|
用锥形量热计对电缆或光缆中绝缘材料的着火试验反应特性测定的标准试验方法
|
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
| ASTM D 831-1994
|
电缆及电容器油的气体含量的标准试验方法
|
Standard Test Method for Gas Content of Cable and Capacitor Oils
|
| ASTM D 866-1999
|
电线及电缆用丁苯合成橡胶套
|
Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
|
| ASTM E 585/E 585M-2004
|
压实的矿物绝缘、金属铠装、基底金属热电偶电缆的标准规范
|
Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
|
| ASTM F 1835-1997
|
电缆编接装置的标准指南
|
Standard Guide for Cable Splicing Installations
|
| ASTM F 1837M-1997
|
热缩电缆引入密封的标准规范(公制)
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
|
| ASTM F 1883-2003
|
美国线规或米制单位导线和电缆规格选择的标准操作规程
|
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
|
| ASTM F 2180-2002
|
外科植入用金属绞合线和电缆的标准规范
|
Standard Specification for Metallic Implantable Strands and Cables
|
| UL 1063-1998
|
机床用电线和电缆
|
(Machine-tool wires and cables )
|
| UL 1072-1995
|
常压电力电缆
|
(Medium-voltage power cables )
|
| UL 1277-2001
|
有可选光纤值的电力电缆和控制底座电缆
|
(Electrical power and control tray cables with optional optical-fiber members )
|
| UL 13-1996
|
有功率限制的电路电缆
|
(Power-limited circuit cables )
|
| UL 1309-1995
|
海船电缆
|
(Marine shipboard cable )
|
| UL 1425-1998
|
非动力限制火灾报警电路用电缆
|
(Cables for non-power-limited fire-alarm circuits )
|
| UL 1426-2001
|
船用电缆
|
(Electrical cables for boats )
|
| UL 1569-1999
|
包覆金属电缆
|
(Metal-clad cables )
|
| UL 1581-2001
|
电线、电缆和软线的参考标准
|
(Reference standard for electrical wires, cables, and flexible cords )
|
| UL 1651-1997
|
光导纤维电缆
|
(Optical fiber cable )
|
| UL 1655-1997
|
共用天线电视电缆
|
(Community-antenna television cables )
|
| UL 1666-2000
|
电缆和光缆垂直安装在竖井中时火焰蔓延高度的测试
|
(Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts )
|
| UL 1673-1996
|
电动空间加热电缆
|
(Electric space heating cables )
|
| UL 1682-2002
|
针式和套管型插头、插孔和电缆连接器
|
(Plugs, receptacles, and cable connectors, of the pin and sleeve type )
|
| UL 1685-1997
|
电缆和光缆于垂直槽中的火焰传播和烟雾排放试验
|
(Vertical-tray fire-propagation and smoke-release test for electrical and optical-fiber cables )
|
| UL 209-1998
|
网状金属地面电缆管和配件
|
(Cellular metal floor raceways and fittings )
|
| UL 2196-2001
|
防火电缆试验
|
(Tests for fire resistive cables )
|
| UL 2225-1996
|
危险地区用金属包皮电缆和电缆密封配件
|
(Metal-clad cables and cable-sealing fittings for use in hazardous (classified) locations )
|
| UL 2250-1999
|
仪器盘式电缆
|
(Instrumentation tray cable )
|
| UL 4-1996
|
铠装电缆
|
(Armored cable )
|
| UL 44-1999
|
热绝缘线和电缆
|
(Thermoset-insulated wires and cables )
|
| UL 444-2002
|
通信电缆
|
(Communications cables )
|
| UL 493-1995
|
热塑绝缘埋设电源线和分流电缆
|
(Thermoplastic-insulated underground feeder and branch-circuit cables )
|
| UL 5-1996
|
地面金属电缆管道和配件
|
(Surface metal raceways and fittings )
|
| UL 568-2002
|
非金属电缆托架系统
|
(Non-metallic cable tray systems )
|
| UL 5A-2003
|
地面非金属电缆管道和配件
|
(Nonmetallic surface raceways and fittings )
|
| UL 5C-1998
|
用于数据,信号和控制线路的地面电缆管道和配件
|
(Surface raceways and fittings for use with data, signal, and control circuits )
|
| UL 719-2002
|
非金属护套电缆
|
(Nonmetallic-sheathed cables )
|
| UL 814-2004
|
燃气管信号和点火电缆
|
(Gas-tube-sign and ignition cable )
|
| UL 83-2003
|
热塑绝缘电线和电缆
|
(Thermoplastic-insulated wires and cables )
|
| UL 854-1999
|
用户进线电缆
|
(Service-entrance cables )
|
| 编号 |
中文名称 |
英文名称 |